Our Capabilities

Highest Quality Control Standards in the Industry

At Turret Lathe Specialists our facilities are supported by miscellaneous equipment such as, surface plates, saws, and drill presses as well as electrosketching/ink and metal stamping.

 

We also have a climate controlled inspection room with a full line of inspection equipment including a Wilson Hardness Testing Machine, Comparator, Dial Bore Gauges, Profilometre, Gauge blocks and all necessary support equipment. Customer requirements such a plating, electro polish powder coating and painting are also supported here.

 

  • 5 CNC Milling Centers
  • 4 CNC Turning Centers
  • 1 Coordinate Measuring Machine
  • 7 Engine Lathes
  • 4 Lagun Vertical Mills
  • 1 Hardringe Chuckers
  • 2 Surface Grinders
  • 1 Auto Cutoff Saw
  • 1 Bead Blaster
  • Full Range Deburring Equipment

Get a Quote Today

Send Message
Send Message

Our Equipment

CNC VF-2

Vertical Machining Center; 30″ x 16″ x 20″ (762 x 406 x 508 mm), 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, 20-station carousel tool changer, 1000 ipm (25.4 m/min) rapids, power-failure detection module, 1 GB program memory, 15″ color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 55-gallon (208 liter) flood coolant system.

Vertical Machining Center; 64″ x 32″ x 30″ (1626 x 813 x 762 mm), 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, 24+1 side-mount tool changer, 600 ipm (15.2 m/min) rapids, automatic chip auger, programmable coolant nozzle, color remote jog handle, power-failure detection module, 1 GB program memory, 15″ color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 95-gallon (360 liter) flood coolant system.

Vertical Machining Center; 40″ x 20″ x 25″ (1016 x 508 x 635 mm), 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, 20-station carousel tool changer, 1000 ipm (25.4 m/min) rapids, power-failure detection module, 1 GB program memory, 15″ color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 55-gallon (208 liter) flood coolant system.

Vertical Machining Center; 64″ x 32″ x 30″ (1626 x 813 x 762 mm), 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct-drive, 24+1 side-mount tool changer, 600 ipm (15.2 m/min) rapids, automatic chip auger, programmable coolant nozzle, color remote jog handle, power-failure detection module, 1 GB program memory, 15″ color LCD monitor, USB port, memory lock keyswitch, rigid tapping and 95-gallon (360 liter) flood coolant system.

ISO 9001:2008 Cert

Quality Control

(C) Copyright 2018 – AUTO REPAIR THEME . All rights reserved.
tls
875 South Rose Place Anaheim, California 92805
Support : 714-520-0058
Mon – Fri : 5:00am – 3:30pm
Copyright © 2018 Turret Lathe Specialists Wordpress Theme. All Rights Reserved.